Editorial
Insights into 3D printing in medical applications
Quantitative Imaging in Medicine and Surgery
2019;
9
(1)
:1-5
.
(25 January 2019)
Original Article
Synchrotron radiation computed tomography assessment of calcified plaques and coronary stenosis with different slice thicknesses and beam energies on 3D printed coronary models
Quantitative Imaging in Medicine and Surgery
2019;
9
(1)
:6-22
.
(25 January 2019)
Augmented reality and three-dimensional printing in percutaneous interventions on pulmonary arteries
Quantitative Imaging in Medicine and Surgery
2019;
9
(1)
:23-29
.
(25 January 2019)
Imitating human soft tissue on basis of a dual-material 3D print using a support-filled metamaterial to provide bimanual haptic for a hand surgery training system
Quantitative Imaging in Medicine and Surgery
2019;
9
(1)
:30-42
.
(25 January 2019)
Investigating accuracy of 3D printed liver models with computed tomography
Quantitative Imaging in Medicine and Surgery
2019;
9
(1)
:43-52
.
(25 January 2019)
Optimization of computed tomography pulmonary angiography protocols using 3D printed model with simulation of pulmonary embolism
Quantitative Imaging in Medicine and Surgery
2019;
9
(1)
:53-62
.
(25 January 2019)
3D-printed breast phantom for multi-purpose and multi-modality imaging
Quantitative Imaging in Medicine and Surgery
2019;
9
(1)
:63-74
.
(25 January 2019)
Patient-specific 3D printed pulmonary artery model with simulation of peripheral pulmonary embolism for developing optimal computed tomography pulmonary angiography protocols
Quantitative Imaging in Medicine and Surgery
2019;
9
(1)
:75-85
.
(25 January 2019)
Patient-specific 3D printed model of biliary ducts with congenital cyst
Quantitative Imaging in Medicine and Surgery
2019;
9
(1)
:86-93
.
(25 January 2019)
Technical Note
Design and fabrication of a personalized anthropomorphic phantom using 3D printing and tissue equivalent materials
Quantitative Imaging in Medicine and Surgery
2019;
9
(1)
:94-100
.
(25 January 2019)
3D multi-tissue printing for kidney transplantation
Quantitative Imaging in Medicine and Surgery
2019;
9
(1)
:101-106
.
(25 January 2019)
Quantitative and qualitative comparison of low- and high-cost 3D-printed heart models
Quantitative Imaging in Medicine and Surgery
2019;
9
(1)
:107-114
.
(25 January 2019)
Review Article
Virtual museum of congenital heart defects: digitization and establishment of a database for cardiac specimens
Quantitative Imaging in Medicine and Surgery
2019;
9
(1)
:115-126
.
(25 January 2019)
Disclosure:
This focused issue “3D Printing in Medicine” was commissioned by the editorial office, Quantitative Imaging in Medicine and Surgery without any sponsorship or funding. Zhonghua Sun served as the unpaid Guest Editor for the focused issue.
